DRYVENT 150 Kitchen Extractor Fan
Terms & Conditions
About DRYVENT 150 Kitchen FanThe DRYVENT 100 & 150 fans are a multifunctional auto controlled high specification, dehumidifying fan designed for the particularly demanding condensation control requirements of kitchen, utility, or similar environments. As well as a multifunctional fan operated by an app if required, this includes speed control on both trickle and high level extract. This fan works best when used as part of a cross-flow ventilation system with other Vapourflow units. These units are effective for damp conditions, the basic operational setting runs continually, extracting at low speed to remove moisture laden air at source before it can condense. This condensation control is achieved through the inclusion of an internal, automatic Autostat unit. When the built-in Autostat detects the humidity level rising above acceptable levels the fan triggers into high speed delivering powerful performance when it is needed most. Control the Autostat unit by a remote switch or via the bluetooth app.
Features and BenefitsWe recommend this unit is used as part of a cross-flow ventilation system with other Vapourflow units Removable grease filter for the Kitchen DRYVENT 150 fan Incorporates the Autostat Humidity Controller that monitors ambient humidity and automatically adjusts If required a speed control via app, with the powerful DRYVENT 150 Low energy, low cost continuous running at 50m³/h (low speed) Incorporates a data-logger that captures humidity, temperature and fan operation providing details on the dwelling air quality for improved condensation control management, all available with bluetooth download Incorporates reversible DC fan motors – designed to operate for 50,000+ hours fault free Which means: ◊ Almost silent operation on trickle ◊ Cost effective as it is inexpensive to run, low maintenance and has a long life. ◊ Can be fixed in any orientation without affecting performance (wall, ceiling) Air flow continuous, thereby conforming to building regulations part F 5 year motor guarantee, 2 year product guarantee The DRYVENT fans are programmed for proportional overun timer control, minimal operation at high speed Manual override option via bluetooth app control for DRYVENT 150
General Notes on Fan InstallationsThe fan position should be as far as practical from the main source of air replacement. This is to avoid short-circuiting of the airflow. The fan can be placed on a wall or ceiling. The DRYVENT 150 fans have a 150 mm spigot to fit into a circular telescopic wall sleeve. The ducting hole through the wall requires a minimum of a 5-degree downward slope to the outside. The fan should be located at a high level close to the moisture source. If the room/ dwelling contains a fuel burning device such as a gas boiler with a non-balanced flue, it is essential that there is enough replacement air to prevent fumes being drawn down the flue where the fan is extracting.
And for the SpecifierThe Dryvent 150 is supplied with an internal Autostat, wall sleeve, external grille and a removable grease filter.
General MaintenanceVapourFlow products are designed with longevity in mind, for this, they need to be cleaned and maintained on a regular basis. It is advised that every 6-12 months the following should be done:
- Wipe the chassis and grilles with a damp cloth to remove any detritus
- Hoover the grilles to remove any large dust particles that may have been formed
- Remove and clean the filter on the unit
Terms & Conditions